Site Inspector
Western Development Company Limited (WDCL)
Role Purpose
- Provide continuous field surveillance and inspection of construction activities, verifying that workmanship, materials, tests, and records conform to approved drawings, specifications, procedures, and ITP requirements.
Key Responsibilities
- Review the daily work scope, approved drawings, method statements, inspection points, and acceptance criteria before inspection.
- Inspect civil, structural, mechanical, piping, welding, coating, installation, testing, and reinstatement activities within the assigned competence.
- Confirm that only approved materials, qualified personnel, valid procedures, and calibrated tools are used.
- Witness required tests and measurements and verify results against specified tolerances and acceptance criteria.
- Raise clear inspection observations, punch items, and NCR inputs, supported by measurements, photographs, and traceable references.
- Verify corrections and repairs and complete reinspection before work is concealed, released, or progressed.
- Maintain daily inspection reports, inspection-request status, red-line/as-built inputs, and evidence files.
- Coordinate access and inspection timing with construction supervisors, client representatives, and specialist inspectors.
- Escalate deviations, repeated workmanship issues, material damage, or unsafe conditions promptly.
Key Performance Measures
- Planned inspection points attended and recorded
- Inspection reports issued accurately and on time
- Defects detected before concealment or system turnover
- Reinspection and punch closure cycle time
- Compliance with site HSE and permit requirements
Qualifications and Experience
- OND / HND or Bachelor’s Degree in a relevant Engineering, Construction, Welding, or Materials discipline.
- Typically 5 or more years of site inspection experience on oil and gas, EPC, civil, pipeline, tank, or facility projects.
- Ability to read construction drawings, specifications, method statements, ITPs, and basic code acceptance requirements.
- Practical knowledge of inspection tools, calibration status, material traceability, and field reporting.
- Physical capability and willingness to work in active construction areas and variable weather conditions.
Preferred Certifications and Standards Knowledge:
- Relevant discipline certification such as CSWIP, ASNT/ISO 9712 Level II, AMPP/NACE, or civil inspection training is preferred.
- Rope-access certification is advantageous only where the assignment requires it.
- Site HSE induction, permit-to-work, working-at-height, and confined-space awareness as applicable.
Core Competencies:
- Field surveillance and defect recognition
- Drawing and specification interpretation
- Measurement and inspection-tool use
- Evidence-based reporting
- Constructive contractor communication
Reporting and Interfaces:
- Internal interfaces: Site QA/QC, construction, engineering, materials, commissioning, document control, and HSE personnel.
- External interfaces: Client inspectors, contractors, subcontractors, laboratories, and specialist inspection providers.
Application Closing Date
31st July, 2026.
How to Apply
Interested and qualified candidates should:
Click here to apply online
Share this job:
Vacancy posted 12 hours ago
Similar jobs that could be interesting for youBased on the Site Inspector in Port Harcourt, Rivers vacancy
- ...Certifications and Standards Knowledge: ASNT/ISO 9712 Level II or PMI/materials inspection training is advantageous. Welding inspector or API certification is desirable for piping and pressure-equipment materials. Working knowledge of relevant ASTM materials...
- ...Welding, QC, construction, pipeline/tank inspection, materials, HSE, and document control teams. External interfaces: Client inspectors, NDT contractors, laboratories, radiation-safety personnel, and Level III authorities. Application Closing Date 31st July,...
- ...Job Summary Our client is seeking to employ competent QA / QC Inspectors to support quality assurance and quality control activities across its operational facilities. The successful candidates will be responsible for ensuring that all materials, equipment, maintenance...
- Role Purpose ~ Inspect, witness, and document the removal, overhaul, testing, certification, preservation, and reinstallation of pressure safety and relief valves so that each device is traceable, correctly set, leak-tight, and fit for its designated service. Key...
- ...under rope access when specifically trained and authorised. Preferred Certifications and Standards Knowledge: AMPP/NACE Coating Inspector Level 2 or equivalent is strongly preferred; Level 1 may be accepted for supervised assignments. Rope-access certification is...
- ...construction, welding, coating, civil, commissioning, operations, asset integrity, and HSE teams. External interfaces: Client inspectors, tank contractors, NDT/coating providers, laboratories, and specialist engineering assessors. Application Closing Date Not...
- ...locations, terminals, crossings, or live-facility interfaces. Preferred Certifications and Standards Knowledge: CSWIP 3.1 Welding Inspector and ASNT/ISO 9712 Level II are strongly preferred. AMPP/NACE coating certification is advantageous. Working knowledge of...
- Role Purpose ~ Plan, coordinate, and document statutory and code-required inspections for facility equipment and safety-critical assets, maintaining a reliable compliance register and ensuring overdue, defective, or uncertified items are controlled. Key Responsibilities...
- ...Description SOW Real Estate is expanding its Port Harcourt operations and is looking for a skilled and detail-oriented Architect/Site Manager to join our team. If you have a strong eye for design, hands-on site management experience, and a passion for delivering...
- ...Job Summary We are seeking to employ competent Company Site Representatives to provide administrative, commercial, and operational support across its business functions. The successful candidates will play a key role in ensuring the efficient coordination of contracts...
- Role Purpose ~ Inspect oil-spill preparedness and field response activities to verify that containment, recovery, shoreline/land protection, waste handling, equipment readiness, and response records meet approved plans, environmental requirements, and safe-work controls...
- • HND/B.Sc. in Civil, or Facility Engineering. • Minimum of 3-5 years experience in QA/QC or facility management inspection. • Certification in QA/QC Inspection, or Facility Management (IFMA/BIFM) is an advantage. • Working knowledge of preventive maintenance systems...
Lufor Technical Limited
Port Harcourt, Riversa month ago - ...yards, fabrication facilities, and offshore/onshore operational sites. Schedule and coordinate routine preservation inspections... .../MM User Certification NACE Corrosion Technician or Coating Inspector Certification (Advantage) API Asset Integrity or Materials Management...
- ...availability, competence, and inspection resources before release to site. Coordinate quality coverage for civil, structural,... ...points, tolerances, and acceptance criteria to supervisors and inspectors. Monitor contractor workmanship, material traceability, equipment...
- ...criticality, manufacturing complexity, quality risk, and required-on-site dates. Review purchase orders, vendor quality plans,... ...teams. External interfaces: Suppliers, subvendors, third-party inspectors, freight providers, clients, certification bodies, and testing...
- ...procurement, completions, operations, IT, and document control teams. External interfaces: Clients, contractors, vendors, third-party inspectors, and system/reporting service providers. Application Closing Date 31st July, 2026. How to Apply Interested and...
- ...continuous improvement practices where applicable. Promote a culture of quality awareness across project teams. Mentor junior inspectors and quality personnel. Qualifications B.Eng. / B.Sc. / HND in Mechanical, Civil, Electrical, Instrumentation, Metallurgical...
- ...operations by ensuring the safe and timely movement of personnel, equipment, tools, materials, and documentation between offices, project sites, customer locations, warehouses, suppliers, and other designated destinations. The role contributes to operational efficiency,...
- ...materials, equipment, and spare parts to prevent deterioration or damage. Coordinate material movements between warehouses, operational sites, offshore facilities, and vendors. Support offshore warehouse operations, including mobilization and demobilization of equipment...
- ...Role Purpose ~ Coordinate practical HSE implementation across project and site activities, helping leaders and work teams identify hazards, comply with approved controls, prevent incidents, protect the environment, and continually improve HSE performance. Key Responsibilities...
- ...routine compliance reviews across projects, procurement, finance, HR, logistics, HSE, and operations. Perform compliance testing and site audits to verify adherence to approved processes. Monitor implementation of corrective and preventive actions arising from audits...
- ...and subcontractors to achieve planned work targets. Monitor work progress and implement recovery actions where delays occur. Site Coordination: Coordinate activities with Engineering, Operations, QA/QC, HSE, Planning, Procurement, Logistics, and Commissioning...
- ...levels of productivity, quality workmanship, and strict compliance with Health, Safety, and Environment (HSE) requirements across all site activities. Key Responsibilities Construction Supervision: Supervise daily structural fabrication, erection, installation,...
- ...Stakeholder & Leadership Responsibilities: Rig managers and crews; client drilling supervisors ("company men"); ME-16 HSE advisers on site. ME-17 for crew pipeline; DW-05 for equipment; DW-04 for program execution; marine authorities for barge/tender ops. Required...
- ...instrumentation drawings Support greenfield and brownfield projects, including tie-ins, revamps, and as-built documentation. Conduct site surveys and update engineering drawings based on field measurements. Review and integrate vendor drawings into engineering...
- ...the following field systems and equipment: PA/GA, CCTV, GMDSS, Access control, Radar with AIS, UHF/VHF Radios, Satellite TV, Line of site/Non-line of site microwave links: WiMAX, 4G/LTE, Radar Beacon (RACON), Non-Directional Beacon (NBD), Video conference,...
- ...surveillance audits, and management reviews Maintaining document control registers and ensuring records remain audit-ready Client & Site Administrative Support: Support administrative coordination across PSL's operating states. Supporting admin patrols across all...
- ...the following field systems and equipment: PA/GA, CCTV, GMDSS, Access control, Radar with AIS, UHF/VHF Radios, Satellite TV, Line of site/Non-line of site microwave links: WiMAX, 4G/LTE, Radar Beacon (RACON), Non-Directional Beacon (NBD), Video conference,...
- ...Isometric drawings, Method Statements, Spading Plans, Isolation Plans, Lifting Plans, Job Risk Assessments (JRA)Conduct regular offshore site visits to monitor progress, resolve preparation issues, and ensure alignment between stakeholders ; Support shutdown planning...
- ...Description The ideal candidate would be responsible for leading and coordinating security operations across multiple client sites, ensuring effective deployment of personnel, operational discipline, service quality, incident management, and compliance with company...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Site Inspector. Be the first to apply!
